|
标准号 |
英文题目 |
中文题目 |
技术机构 |
发布日期 |
适用指令 |
|
EN 55012:2007 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
车辆、船舶和内燃机---无线电干扰性能---接收机离岸保护的测量范围和方法 |
CLC/TC 210 |
2007-11-30 |
2004/108/EC |
|
EN 60793-2-10:2007 |
Optical fibres -- Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
光学纤维---第2-10部分：产品规范---A1类多模光纤分规范 |
CLC/TC 86A |
2007-11-30 |
|
|
EN 60793-1-48:2007 |
Optical fibres -- Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |
光学纤维---第1-48部分：测量方法和试验程序---偏振模色散 |
CLC/TC 86A |
2007-11-30 |
|
|
EN 60947-5-9:2007 |
Low-voltage switchgear and controlgear -- Part 5-9: Control circuit devices and switching elements - Flow rate switches |
低压开关和控制器――第5-9部分：电路控制器件和开关元件---流速变换开关 |
CLC/TC 17B |
2007-11-30 |
2006/95/EC, 2004/108/EC |
|
EN 60191-6-13:2007 |
Mechanical standardization of semiconductor devices -- Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array (FBGA/FLGA) |
半导体器件机械标准化---第6-13部分：小间距球栅阵列和小间距盘栅阵列顶部开口型插座设计指南 |
CLC/SR 47D |
2007-11-30 |
|
|
EN 60730-2-3:2007 |
Automatic electrical controls for household and similar use -- Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps |
家庭和类似用途自动电气控制---第2-3部分：管状荧光灯镇流器热保护专门要求 |
CLC/TC 72 |
2007-11-30 |
2006/95/EC |
|
EN 60730-2-4:2007 |
Automatic electrical controls for household and similar use -- Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
家庭和类似用途自动电气控制---第2-4部分：密封和半密封型发电压缩机的热电机保护装置专门要求 |
CLC/TC 72 |
2007-11-30 |
2006/95/EC |
|
EN 50342-2:2007 |
Lead-acid starter batteries -- Part 2: Dimensions of batteries and marking of terminals |
铅酸起动器电池---电池尺寸尺寸和端接标记 |
CLC/TC 21X |
2007-11-30 |
|
|
EN 60730-2-10:2007 |
Automatic electrical controls for household and similar use -- Part 2-10: Particular requirements for motor-starting relays |
家庭和类似用途自动电气控制---第2-10部分：马达起动继电器专门要求 |
CLC/TC 72 |
2007-11-30 |
2006/95/EC |
|
EN 50463:2007 |
Railway applications - Energy measurement on board trains |
铁路应用――火车能量测量 |
CLC/TC 9X |
2007-11-29 |
|
|
EN 60079-29-1:2007 |
Explosive atmospheres -- Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases |
爆炸性气氛---第29-1部分：煤气探测器的性能要求 |
CLC/SC 31-9 |
2007-11-23 |
94/9/EC |
|
EN 61188-5-3:2007 |
Printed boards and printed board assemblies - Design and use -- Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides |
印制板和印制板组件――设计和使用――第5-3部分：装配（焊盘/焊点）考虑---双侧翼型引线元器件 |
CLC/SR 91 |
2007-11-23 |
|
|
EN 60079-29-2:2007 |
Explosive atmospheres -- Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
爆炸性气氛---第29-2部分：煤气探测器---可燃气体和氧气探测器的选择、安装、使用和维护 |
CLC/SC 31-9 |
2007-11-23 |
|
|
EN 61188-5-4:2007 |
Printed boards and printed board assemblies - Design and use -- Part 5-4: Attachment (land/joint) considerations - Components with J leads on two sides |
印制板和印制板组件---设计和使用---第5-4部分：装配（焊盘/焊点）考虑---双侧J型引线元器件 |
CLC/SR 91 |
2007-11-23 |
|
|
EN 61188-5-5:2007 |
Printed boards and printed board assemblies - Design and use -- Part 5-5: Attachment (land/joint) considerations - Components with gull-wing leads on four sides |
印制板和印制板组件―设计和使用―第5-5部分：装配（焊盘/焊点）考虑---4 侧翼型引线元器件 |
CLC/SR 91 |
2007-11-23 |
|
|
EN 61193-2:2007 |
Quality assessment systems -- Part 2: Selection and use of sampling plans for inspection of electronic components and packages |
质量评定体系---第2部分：电子元器件和封装抽样计划的选择和使用 |
CLC/SR 91 |
2007-11-22 |
|
|
EN62271-209:2007 |
High-voltage switchgear and controlgear -- Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations |
高电压开关和控制器――第209部分：额定电压>52kv煤气隔离金属封装开关电缆连接器---充液和挤压成型绝缘电缆---充液和干型电缆终端 |
CLC/TC 17AC |
2007-11-21 |
|
